PTX5

Factory-activated AGM powersport batteries come pre-charged, sealed, and maintenance-free, eliminating the need for acid handling or setup. Ready to install, they deliver safe, reliable power with maximum convenience.

The PTX5LBS-FS is part of our Powersports AGM Factory Activated powersports AGM range. It delivers AGM Technology, Factory Activated, Increased Power, Ready to Use, and SLA Maintenance Free for ATV, Motor Cycle, Power Sport, and Generator Starting including motorcycles, ATVs, and personal watercraft. Backed by decades of expertise, Power-Sonic batteries are subject to stringent quality controls through each step of the manufacturing process to ensure compliance, performance consistency, and reliability.

Cycle Applications: Apply constant voltage charge at 2.35VPC – 2.45VPC (14.1 to 14.7 volts for 12V Monobloc) at 20°C. The initial charging current should be set at less than C/5 Amps. Switch to float charge when the current falls to a 3% capacity rate to avoid overcharging. Stand-By or "Float" Service: Apply constant voltage charge of 2.25VPC – 2.30VPC (13.5 to 13.8 volts for 12V Monobloc) at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Temperature Compensation: Charging voltage for both cyclic and stand-by applications should be regulated in relation to ambient temperature. As temperature rises, charging voltage should be reduced to prevent overcharge and increased as the temperature falls to avoid undercharge. For further charging information, including temperature compensation factors, see the Power-Sonic Technical Manual.