PSL-12450E

Power Sonic’s PSL series of LiFePO4 batteries have been designed and developed to provide a lighter, higher power and longer life solution to lead acid batteries. LiFePO4 batteries last longer and can produce 10 times the number of cycles than a typical lead acid battery. At only 40% of the weight of the equivalent lead acid battery our LiFePO4 range is ideal for those applications that need to be lighter and more mobile but deliver the same power.LiFePO4 is much safer than other lithium technologies, and reduces the risk of explosion or combustion due to high impact, over-charging or short circuit situations. Not only will they not catch fire, but the “dry cell” construction of LiFePO4 batteries eliminates the use of poisonous lead and harmful sulphuric acid. They can be mounted in any direction, and will never leak acid. We have a wide range of batteries designed to provide high performance in cyclic applications. With nearly 50 years extensive experience with developing and supplying batteries in a variety of cycling applications from medical devices to large scale energy storage, our team of application experts can provide the right battery technology from our comprehensive portfolio to meet your technical demands. Power Sonic’s cutting-edge manufacturing and process control combined with meticulous quality assurance procedures guarantee consistent and dependable performance. Power Sonic’s PSL-12450E has an integrated battery management system (BMS) that controls the parameters of the battery to provide optimum safety and performance. Enhanced design balances the battery cells and protects against over-charging or over-discharging.

The PSL-12450E is part of our Rechargeable Lithium Battery range of Lithium Iron Phosphate (LiFePO4) batteries which has been engineered to offer a lighter and longer life with higher power solutions when compared to standard lead acid batteries. The 12.8V 45.0A LiFePO4 battery offers superior performance in a wide range of applications including Data Center, Medical, Mobility, Transport, Utility, and Wind. The PSL-12450E offers up to 10 times more cycles at 40% of the weight of the equivalent lead acid battery. Our PSL Series has an integrated battery management system (BMS) that controls the parameters of the battery to provide optimum safety and performance. Our enhanced design balances the battery cells and protects against overcharging or over discharging. All Power-Sonic batteries are subject to stringent quality controls through each step of the manufacturing process to ensure consistency and reliability.

Cycle Applications: Apply constant voltage charge at 3.60VPC – 3.65VPC (14.4 to 14.6 volts for 12V Monobloc) at 20°C. The initial charging current should be set at less than C/4 Amps. Terminate the charge when the current falls to a 3% capacity rate to avoid overcharging. Stand-By or "Float" Service: Apply constant voltage charge of 3.35VPC – 3.45VPC (13.4 to 13.8 volts for 12V Monobloc) at 20°C. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. For further charging and maintenance information see the lithium resource center on Power-Sonic.com.